Virnig’s facilities encompass all aspects of the manufacturing process, from engineering and cutting raw materials to machining, welding, and painting. Virnig manufactures all of its skid steer, compact tractor, mini skid steer, and mini excavator attachments in-house.
SKID STEER
Virnig has skid steer attachments including brush cutters, brooms, snow blades, utility forks, rock buckets, grapples, and pallet forks.
AGRICULTURE
High Dump Bucket
Increases vertical lift up to 44”, horizontal reach up to 13″ and rotates into a full 90-degree dump; ideal for loading feed mixers and dump trucks.
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- WINDOWS FOR BETTER OPERATOR VISIBILITY
- 3/4″ x 6″ WELD-ON EDGE
High Dump Bucket
High Torque Auger
Drive unit interchangeable between skid steers, mini excavators, and mini skid steers.
- HOSES ROUTED FROM TOP OF HOUSING FOR DEEPER DRILLING WITH 12″ DIAMETER BITS
- DIRECT DRIVE MOTOR WITH HYDRAULIC PRESSURE RELIEF PROTECTION
- PLANETARY REDUCTION ENSURES LONGEVITY & CONSISTENT TORQUE
- BI-DIRECTIONAL AUGER ROTATION
- AUGHT36 PROVIDES 20% MORE TORQUE FOR TOUGH DRILLING CONDITIONS
High Torque Auger
4′ Auger Bits
PRODUCT CATEGORY: Skid Steer
48″ tall auger bits with 2″ hex or 2 9/16″ round collar compatible with Virnig Auger Drives.
- VIEW 36″ AUGER BITS
- STANDARD BITS (SAV) & TREE BITS (TAV)
- FOR LIGHT TO MODERATE GROUND CONDITIONS
- 2″ HEX OR 2 9/16” ROUND COLLAR. STANDARD BITS HAVE ONE PIECE CAST STEEL BORING HEAD & TREE BITS HAVE FABRICATED BORING HEAD
- DOUBLE FLIGHTING WITH BOLT-ON TEETH
- STANDARD WITH WISDOM & WISDOM GAGE TEETH & FISHTAIL POINT
- VARIETY OF TOOTH OPTIONS AVAILABLE
- AUGER EXTENSIONS & ADAPTERS AVAILABLE
Auger Bits
Hay Bucket Grapple
PRODUCT CATEGORY: Skid Steer
Haul hay bales, silage, and other light materials.
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- 3/4″ x 6″ WELD-ON EDGE
v40 Utility Fork Grapple
PRODUCT CATEGORY: Skid Steer
Single jaw grapple designed to handle manure, brush, and debris.
- NO CROSS MEMBER FOR BETTER PENETRATION
- HIGH STRENGTH REPLACEABLE TINES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON HINGE
v60 Skeleton Rock Bucket
PRODUCT CATEGORY: Skid Steer
The toughest and heaviest rock bucket designed for the most demanding applications.
- EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
- ROCK DAM & NOTCH NEAR TINE TIPS HOLD ROCKS SECURELY
- TINE TIPS FULLY GUSSETED FOR ADDED STRENGTH
BROOMS & SWEEPERS
Pick-Up Broom – Internal Water Tank
Patent pending internal water tank design with industry-leading capacity to control dust without compromise.
- 55-GALLON INTERNAL WATER TANK W/CAPACITY INDICATORS PROVIDES 35 MINUTES OF CONTINUOUS RUNTIME
- ADJUSTABLE VALVE REGULATES WATER PRESSURE
- RECESSED & GUARDED MOTOR
- HD BUCKET WITH WEAR BARS & BOLT-ON EDGE
- OVERSIZED 2″ GREASABLE BEARING
- PIN ADJUSTMENT SYSTEM TO QUICKLY SET BRISTLE HEIGHT
- REPLACE WAFERS EASILY WITHOUT DISCONNECTING HOSES. STANDARD WITH POLY/WIRE WAFERS.
PUB – Internal Water Tank Pick Up Broom
Direct drive Eaton® motor and intelligent design ensure years of performance.
- RECESSED & GUARDED MOTOR
- HD BUCKET WITH WEAR BARS & BOLT-ON EDGE
- OVERSIZED 2″ GREASABLE BEARING
- PIN ADJUSTMENT SYSTEM TO QUICKLY SET BRISTLE HEIGHT
- REPLACE WAFERS EASILY WITHOUT DISCONNECTING HOSES. STANDARD WITH POLY/WIRE WAFERS.
Pick-Up Broom
Angle Broom
Direct drive Eaton® motor and exclusive self-centering swing linkage system for optimal sweeping.
- SWING LINKAGE SYSTEM SELF-CENTERS BROOM WHEN ANGLED
- RECESSED & GUARDED MOTOR
- OVERSIZED 2″ GREASABLE BEARING
- REPLACE WAFERS EASILY WITHOUT DISCONNECTING HOSES. STANDARD WITH POLY/WIRE WAFERS.
- STANDS FLIP DOWN TO PROTECT BRISTLES DURING STORAGE
Angle BroomBRUSH CUTTERS
- DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVES
- HYDRAULIC BRAKING STOPS FLYWHEEL IN LESS THAN 10 SECONDS
- STANDARD MOTOR GUARD & SPINDLE GUARD
- CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS
- FLOATING DECK FOLLOWS THE CONTOUR OF THE GROUND
- DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVES
- HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
- STANDARD MOTOR GUARD & SPINDLE GUARD
- CIRCULAR FLYWHEEL WITH 3 UPDRAFT BLADES BOUNCES OFF STUMPS
- CHAIN CURTAIN PREVENTS FLYING DEBRIS
- REPLACEABLE FRONT SKID SHOES
- DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVES
- HYDRAULIC BRAKING STOPS FLYWHEEL WITHIN 10 SECONDS
- STANDARD MOTOR GUARD & SPINDLE GUARD
- CIRCULAR FLYWHEEL WITH 4 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
- REPLACEABLE AR400 FRONT SKID SHOES & BOLT-ON AR400 BOTTOM DECK RUNNERS
- BENT-AXIS PISTON MOTOR WITH RELIEF VALVES
- STANDARD MOTOR GUARD & SPINDLE GUARD
- 60″ FULLY-MACHINED PERFECTLY BALANCED QUADCO® DISC
- BOLT-ON STEEL TOOTH MOUNTS WITH FOUR-SIDED ROTATABLE & REPLACEABLE TEETH (CARBIDE TEETH AVAILABLE)
- 3 DECK MOUNTED TEETH & RECUTTER BAR FOR A FINER FINISH
- 3/8″ GRADE 80 INTERIOR DECK WELDMENT
- REPLACEABLE PUSH BAR, CHUTE & DEFLECTOR
- TWO CHUTE STYLES Choose from two chute styles; standard or open.
- FIXED & VARIABLE SPEED BENT-AXIS PISTON MOTOR OPTIONS. VARIABLE MOTOR PROVIDES MORE TORQUE FOR PRODUCTIVE STUMP GRINDING & MULCHING BELOW GRADE
- FACTORY TUNED TO THE LOADER FOR OPTIMAL DRUM RPM — NO MOTOR ADJUSTMENT OR SERVICE TECHS REQUIRED
- 18″ PERFECTLY BALANCED QUADCO® DRUM WITH FULLY ENCLOSED GREASEABLE BEARINGS (VIEW DRUM ROTOR GUIDE)
- ANTI-WRAP DRUM PLATES PROVIDE WIRE & DEBRIS ENTANGLEMENT PROTECTION
- INTERCHANGEABLE QUADCO® BOLT-ON STEEL & CARBIDE TOOTH OPTIONS (VIEW TOOTH GUIDE)
- AR400 BOLT-ON SKID SHOES, ADJUSTABLE PUSH BAR & REPLACEABLE AR400 WEAR LINER
- ADJUSTABLE BOTTOM BITE PLATE TO CONTROL MATERIAL DISCHARGE SIZE
- SPINDLE LOW PRESSURE OIL VENT SAFEGUARDS BEARING ADAPTER SEALS IF MOTOR SEALS FAIL
- CASE DRAIN CONNECTION INDICATOR PROVIDES VISUAL CONFIRMATION OF FUNCTIONING CASE DRAIN
- REAR CHAIN CURTAIN REDUCES DEBRIS THROWN TOWARD LOADER & OPERATOR
BUCKETS
v60 Multi-Purpose Bucket (4-in-1)
PRODUCT CATEGORY: Skid Steer
Heavily built bucket for dozing, clamming, leveling, and bottom dumping.
- STANDARD WITH CYLINDER GUARDS
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- 5/8″ x 6″ REVERSIBLE STEEL BOLT-ON EDGES
- 1″ x 6″ WELD-ON EDGE
v60 Skeleton Rock Bucket
PRODUCT CATEGORY: Skid Steer
The toughest and heaviest rock bucket designed for the most demanding applications.
- EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
- ROCK DAM & NOTCH NEAR TINE TIPS HOLD ROCKS SECURELY
- TINE TIPS FULLY GUSSETED FOR ADDED STRENGTH
v50 Utility Bucket
PRODUCT CATEGORY: Skid Steer
General purpose bucket suited for dense and bulk materials.
- 3/4″ x 6″ WELD-ON EDGE
v50 Low Profile Dirt Bucket
PRODUCT CATEGORY: Skid Steer
Heavily built bucket with a low back and extended bottom for cutting edge visibility.
- CUTTING EDGE VISIBLE FROM INSIDE CAB
- GRADING BEND FOR OPTIMAL REVERSE GRADING & CURVED INSIDE FOR EASIER MATERIAL CLEANOUT
- 3/4″ x 6″ WELD-ON EDGE
- ADDITIONAL GUSSETING ON BACK OF BUCKET
- 1/2″ x 4″ WEAR BARS PROTECT THE BUCKET BOTTOM
v50 Snow / Light Material Bucket
PRODUCT CATEGORY: Skid Steer
The most popular bucket for hauling high volumes of snow, mulch, and light materials.
- 3/16” SHELL & 1/4″ SIDE PLATES
- 3/8” VERTICAL BRACES INSIDE BUCKET
- 3/8” SIDE EDGES & GUSSETS
- WINDOWS FOR BETTER OPERATOR VISIBILITY. AVAILABLE WITH SOLID BACK
- 3/4″ x 6″ WELD-ON EDGE
CONSTRUCTION & LANDSCAPE
U-Blade
PRODUCT CATEGORY: Skid Steer
Dual-point blade design for digging and trenching in forward and reverse.
- CARRY & TRANSPLANT TREES & ROCKS, DIG TRENCHES & BREAK UP COMPACTED SOIL
- 3/8″ THICK HIGH-CARBON STEEL BLADE
v50 Multi-Purpose Bucket (4-in-1)
PRODUCT CATEGORY: Skid Steer
Multiple functions including dozing, clamming, leveling, and bottom dumping.
- STANDARD WITH CYLINDER GUARDS
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- 5/8″ x 6″ REVERSIBLE STEEL BOLT-ON EDGES
- 3/4″ x 6″ WELD-ON EDGE
Stump Bucket
PRODUCT CATEGORY: Skid Steer
Remove stumps, roots, and rocks.
- COMPACT DEPTH MAXIMIZES LOADER BREAKOUT FORCE FOR REMOVING STUMPS
- 3/4″ x 6″ WELD-ON EDGE WITH REPLACEABLE SERIES 23 TEETH
- BUCKET REINFORCED WITH LARGE GUSSET PLATES
Digging Tree Puller
PRODUCT CATEGORY: Skid Steer
Dig, pull, and remove trees, stumps, and rocks.
- UNIQUE REPLACEABLE CUTTING EDGES FOR PUNCHING THROUGH HARD SOIL, CUTTING ROOTS & GRUBBING TREES
- FIXED JAW PROVIDES MAX STRENGTH & HELPS CENTER OBJECTS WHILE APPROACHING
- 1″ THICK AR400 SERRATED JAWS & REPLACEABLE SERIES 23 TEETH FOR AGGRESSIVE DIGGING
- TREE STABILIZING SERRATIONS ON GUARD TOP & JAW BASE
- 3/8″ THICK GUARD ANGLED FORWARD & ON CORNERS TO SHED FALLING TREES AWAY FROM LOADER
- 3.5″ DIAMETER CYLINDER PROTECTED INSIDE FRAME & FROM STRESS W/ HARD STOP
- OPEN BACK DESIGN FOR QUICK CYLINDER ACCESS & DIRT CLEANOUT
- 3″ TALL REAR BACK PLATE FOR EFFECTIVE SOIL BACK-DRAGGING
- OPTIMIZED HOSE ROUTING SAFEGUARDS HOSES FROM POTENTIAL DAMAGE
Dozer Blade – 6 Way
PRODUCT CATEGORY: Skid Steer
Heavy-duty frame, 3/8″ thick moldboard, and adjustable skid shoes.
- ANGLE THE BLADE 30° LEFT OR RIGHT & TILT 10° FROM INSIDE THE CAB
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- 5/8″ x 8″ REVERSIBLE STEEL BOLT-ON EDGE
Tree Boom
PRODUCT CATEGORY: Skid Steer
Adds 46 1/2” (from top of quick tach) to the lifting height of the machine.
- 1/2″ STEEL RIGGING PLATES AT THE TOP OF BOOM
- LARGE GUSSET PLATES & TWO PLATES AT THE BASE
- FLAT FRONT FRAME PREVENTS DAMAGE TO TREES DURING TRANSPORT
- RIGGING HOLES ON EACH SIDE OF THE FRAME TO SECURE LOADS
Land Leveler
PRODUCT CATEGORY: Skid Steer
Efficiently level and grade uneven ground going forward or reverse.
- HD DESIGN FOR AGGRESSIVE CUTTING
- WIDE BLADE LOCATION FOR PRECISE CONTROL
- 5/8″ THICK REVERSIBLE STEEL BOLT-ON EDGE
Tree Puller
PRODUCT CATEGORY: Skid Steer
Quickly remove trees, fence posts, and other objects.
- HARD STOP ALLOWS SMALL TREES TO BE PULLED WITHOUT SHEARING THEM OFF
- STANDARD WITH CYLINDER GUARD
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
v60 Trencher
PRODUCT CATEGORY: Skid Steer
The strongest skid steer trencher with 36”, 48” and 60” digging depths.
- HD 50,000LB ANTI-BACK FLEX CHAIN MADE IN THE USA
- THREE MANUAL SIDE-SHIFT POSITIONS FOR TRENCHING NEAR STRUCTURES
- REMOVABLE AUGER CLEARS EXCAVATED SOIL AWAY FROM THE TRENCH
- STANDARD CRUMBER KEEPS TRENCH BOTTOM CLEAN & SMOOTH
- BI-DIRECTIONAL CHAIN ROTATION TO EXPEL OBJECTS
Power Rake
PRODUCT CATEGORY: Skid Steer
Grade soil and gravel, prepare seedbeds, and remove debris with more torque and less maintenance than a chain drive rake.
- BI-DIRECTIONAL OPERATION IN FORWARD OR REVERSE
- ANGLE THE RAKE 25° LEFT OR RIGHT
- GUARDED MOTOR
- FLOATING DESIGN FOR A SMOOTH FINISH & PROVIDES FULL DOWN PRESSURE CAPABILITY
- CARBIDE TIP TEETH
- FLAT FREE URETHANE
- FILLED TIRES FOR EASY MAINTENANCE
Tiller
PRODUCT CATEGORY: Skid Steer
Offset design to cover tire tracks and till next to buildings, sidewalks, etc.
- AGRESSIVE DUAL-EDGE TINES FOR OPERATING IN FORWARD OR REVERSE
- TILLER SHAFT SUPPORTED BY 2″ DIAMETER BEARINGS ON EACH SIDE
- BOLT-ON HEAT-TREATED TINES FOR MAX STRENGTH
- GUARDED MOTOR ON BOTTOM & SIDES
Pick Up Broom
Direct drive Eaton® motor and intelligent design ensure years of performance.
- RECESSED & GUARDED MOTOR
- HD BUCKET WITH WEAR BARS & BOLT-ON EDGE
- OVERSIZED 2″ GREASABLE BEARING
- PIN ADJUSTMENT SYSTEM TO QUICKLY SET BRISTLE HEIGHT
- REPLACE WAFERS EASILY WITHOUT DISCONNECTING HOSES. STANDARD WITH POLY/WIRE WAFERS.
Stump Bucket Grapple
PRODUCT CATEGORY: Skid Steer
Remove and transport stumps, roots, and rocks.
- COMPACT DEPTH MAXIMIZES LOADER BREAKOUT FORCE FOR REMOVING STUMPS
- 3/4″ x 6″ WELD-ON EDGE WITH REPLACEABLE SERIES 23 TEETH
- BUCKET REINFORCED WITH LARGE GUSSET PLATES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON HINGE
GRAPPLES
v60 Skeleton Rock Grapple
PRODUCT CATEGORY: Skid Steer
The toughest rock grapple built for the most demanding applications.
- EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY
- ROCK DAM & NOTCH NEAR TINE TIPS HOLD ROCKS SECURELY
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- STANDARD WITH CYLINDER GUARDS
v60 Scrap Grapple
PRODUCT CATEGORY: Skid Steer
The toughest solid bottom grapple for scooping and hauling loose and bulky debris.
- EXTRA BRACE PLATE & 1/2” VERTICAL BRACES INSIDE BUCKET FOR ADDED STRENGTH
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- 3/4″ x 6″ WELD-ON EDGE
- STANDARD WITH CYLINDER GUARDS
v50 Tine Fork Grapple
PRODUCT CATEGORY: Skid Steer
High-strength design for handling manure, brush, and debris.
- NO CROSS MEMBER FOR BETTER PENETRATION
- 1/2” VERTICAL BRACES INSIDE BUCKET
- HIGH STRENGTH REPLACEABLE TINES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- STANDARD WITH CYLINDER GUARDS
v40 Utility Fork Grapple
PRODUCT CATEGORY: Skid Steer
Single jaw grapple designed to handle manure, brush, and debris.
- NO CROSS MEMBER FOR BETTER PENETRATION
- HIGH STRENGTH REPLACEABLE TINES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON HINGE
v60 Root Rake Grapple
PRODUCT CATEGORY: Skid Steer
The toughest and largest Virnig root rake designed to dig, rake, pile, and load brush.
- HARD STOPS TO PREVENT EXCESS CYLINDER STRESS
- SERIES 23 PIN-ON TEETH CUT INTO SOIL, DIG OUT ROCKS & ROOTS
- STANDARD WITH CYLINDER GUARDS
Stump Bucket Grapple
PRODUCT CATEGORY: Skid Steer
Remove and transport stumps, roots, and rocks.
- COMPACT DEPTH MAXIMIZES LOADER BREAKOUT FORCE FOR REMOVING STUMPS
- 3/4″ x 6″ WELD-ON EDGE WITH REPLACEABLE SERIES 23 TEETH
- BUCKET REINFORCED WITH LARGE GUSSET PLATES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON HINGE
v20 Mini Skid Steer Rotating Log Grapple
PRODUCT CATEGORY: Grapples
Grapple jaw rotates and hangs freely for grabbing and placing logs, brush, and rocks.
- JAWS FEATURE 60″ OPENING & BYPASS EACH OTHER FOR GRABBING SMALLER LOGS
- AR400 STEEL JAW TINES W/ SERRATED TIPS TO PROVIDE A BETTER GRIP
- HOLDING VALVE PREVENTS JAWS FROM DRIFTING OPEN DURING OPERATION
- STANDARD PUSH BAR, ROPE TIE-OFF POINTS & TRAILER RECEIVER HITCH
- SERRATED CRADLE SECURES LOGS IN VERTICAL & HORIZONTAL POSITIONS
- 270° MANUAL ROTATION. 360° HYDRAULIC ROTATION AVAILABLE
- OPTIMIZED HOSE ROUTING & RECESSED GREASE ZERKS SAFEGUARDED FROM POTENTIAL DAMAGE
v60 Four-Cylinder Pipe Pallet Fork Grapple
PRODUCT CATEGORY: Skid Steer
Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain.
- 48” OR 60″ ITA CLASS II FORGED TINES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
Hay Bucket Grapple
PRODUCT CATEGORY: Skid Steer
Haul hay bales, silage, and other light materials.
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
- 3/4″ x 6″ WELD-ON EDGE
Bolt-On Grapple
PRODUCT CATEGORY: Skid Steer
Turn a bucket into a grapple. No cutting or welding required.
- TELESCOPING MOUNT FITS VARIOUS 60-84″ VIRNIG BUCKETS
PALLET FORKS
Rail Pallet Fork: Hex-Guard
PRODUCT CATEGORY: Skid Steer
Adjustable ITA Class II forged tines.
- 3/16″ CLASSIC VIRNIG BRICKGUARD
- 3/4″ BEVELED RAIL
- BRICKGUARD FLUSH WITH TINES TO HELP STABILIZE LOADS
- BRACING CENTERED ON QUICK TACH FOR EASY HOOKUP
- BOLT-ON STEP INSTALLS ON EITHER SIDE
Rail Pallet Fork: Walk-Through
PRODUCT CATEGORY: Skid Steer
Adjustable ITA Class II forged tines.
- WALK-THROUGH DESIGN ALLOWS QUICK CAB ACCESS
- 1/4″ HIGH VISIBILITY BRICKGUARD
- 3/4″ BEVELED RAIL
- BRICKGUARD FLUSH WITH TINES TO HELP STABILIZE LOADS
- BRACING CENTERED ON QUICK TACH FOR EASY HOOKUP
- BOLT-ON STEP INSTALLS ON EITHER SIDE
Wide Rail Pallet Fork: Hi-Vis
PRODUCT CATEGORY: Skid Steer
Wider rail for better stability and adjustable ITA Class II forged tines.
- REMOVE CENTER SECTION TO CHANGE TO A WALK-THROUGH BRICKGUARD
- 1/4″ HIGH VISIBILITY BRICKGUARD
- 3/4″ BEVELED RAIL
- BRICKGUARD FLUSH WITH TINES TO HELP STABILIZE LOADS
- BRACING CENTERED ON QUICK TACH FOR EASY HOOKUP
- BOLT-ON STEP INSTALLS ON EITHER SIDE
Hydraulic Adjust Pallet Fork
PRODUCT CATEGORY: Skid Steer
Adjust the tines simultaneously from 8” to 38” wide without leaving the cab.
- ANGLED MOUNT PLATE OPTIMIZED FOR SKID LOADER USE
- HIGH VISIBILITY BRICKGUARD
- UNIQUE HOLDER DESIGN ALLOWS STANDARD TINES INSTEAD OF EXPENSIVE SHAFT STYLE TINES
- ITA CLASS II FORGED TINES WITH 5,500LB CAPACITY
- BOLT-ON STEP INSTALLS ON EITHER SIDE
- HD 1 9/16″ DIAMETER SHAFT
v60 Four-Cylinder Pipe Pallet Fork Grapple
PRODUCT CATEGORY: Skid Steer
Four-cylinder design applies consistent pressure to secure long pipe over uneven terrain.
- 48” OR 60″ ITA CLASS II FORGED TINES
- NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS
SNOW REMOVAL
v60 Snow Blower
PRODUCT CATEGORY: Skid Steer
Paddle-style auger chews through any type of snow and direct drive motor throws it up to 40 feet.
- ANGLED AUGER PADDLES CHEW THROUGH SNOW & CONTINUALLY FEED THE FAN
- DIRECT DRIVE EATON® MOTORS WITH RELIEF VALVES
- ADJUSTABLE & REVERSIBLE POLY SKID SHOES
- DESIGNED TO HOP OVER SMALL OBSTRUCTIONS
- 3/16″ FAN HOUSING REDUCES DISTORTION
- 270° HYDRAULIC CHUTE ROTATION WITH IN CAB DEFLECTOR CONTROL
- GUARD PROTECTS VALVES & ELECTRICAL COMPONENTS
- 5/8″ x 8″ REVERSIBLE STEEL BOLT-ON EDGE
v60 Angle Snow Blade
PRODUCT CATEGORY: Skid Steer
- 4° SIDE-TO-SIDE OSCILLATION FOLLOWS UNEVEN SURFACES
- HYDRAULIC CROSSOVER RELIEF VALVE PROTECTS THE ATTACHMENT BY ANGLING THE BLADE UPON IMPACT
- ANGLE THE BLADE 30° LEFT OR RIGHT FROM INSIDE THE CAB
- TRIP EDGE PROTECTS OPERATOR & EQUIPMENT
- 5/8″ x 8″ REVERSIBLE STEEL BOLT-ON EDGE ALLOWS 5 1/2″ OF WEAR
v60 v-Snow Blade
PRODUCT CATEGORY: Skid Steer
Hydraulically cycle through all blade positions to break through deep drifts and clear snow with fewer passes. Add wings for more carrying capacity.
- FREE FLOATING DESIGN AUTOMATICALLY ADAPTS TO UNEVEN GROUND IN ALL DIRECTIONS WHILE ALLOWING FULL DOWN PRESSURE
- HYDRAULIC CROSSOVER RELIEF VALVE PROTECTS THE ATTACHMENT BY ANGLING THE BLADES UPON IMPACT
- INDEPENDENTLY ANGLE EACH BLADE 30° FORWARD OR BACKWARD FROM INSIDE THE CAB
- TRIP EDGE PROTECTS OPERATOR & EQUIPMENT
- 5/8″ x 8″ REVERSIBLE STEEL BOLT-ON EDGE ALLOWS 5 1/2″ OF WEAR
v60 Steel Edge Snow Pusher
PRODUCT CATEGORY: Skid Steer
Snow pusher with hardened steel trip-edge and curved moldboard ideal for scraping hard-pack.
- DESIGNED TO AUTOMATICALLY KEEP PUSHER WEIGHT ON EDGE FOR CONSISTENT CLEAN-UP & LESS MAINTENANCE
- REVERSIBLE, SELF-LEVELING AR400 SKID SHOES WITH TAPERED OUTSIDE EDGE TO PROTECT FROM SIDE IMPACTS
- 4° SIDE-TO-SIDE OSCILLATION FOLLOWS UNEVEN SURFACES
- TRIP EDGE PROTECTS OPERATOR & EQUIPMENT
- HD FRAME BRACING WITH BEVELED INSIDE GUSSETS INCREASES SIDE PLATE STRENGTH
v50 Snow / Light Material Bucket
PRODUCT CATEGORY: Skid Steer
The most popular bucket for hauling high volumes of snow, mulch, and light materials.
- 3/16” SHELL & 1/4″ SIDE PLATES
- 3/8” VERTICAL BRACES INSIDE BUCKET
- 3/8” SIDE EDGES & GUSSETS
- WINDOWS FOR BETTER OPERATOR VISIBILITY. AVAILABLE WITH SOLID BACK
- 3/4″ x 6″ WELD-ON EDGE
Angle Broom
Direct drive Eaton® motor and exclusive self-centering swing linkage system for optimal sweeping.
- SWING LINKAGE SYSTEM SELF-CENTERS BROOM WHEN ANGLED
- RECESSED & GUARDED MOTOR
- OVERSIZED 2″ GREASABLE BEARING
- REPLACE WAFERS EASILY WITHOUT DISCONNECTING HOSES. STANDARD WITH POLY/WIRE WAFERS.
- STANDS FLIP DOWN TO PROTECT BRISTLES DURING STORAGE