Atlas Copco Cobra Petrol Breakers

Atlas Copco petrol driven drill and breakers are designed for rock drilling, breaking concrete, cutting asphalt, tamping ballast, digging and other tasks.

Atlas Copco Cobra Petrol Breakers

Multi-Purpose Breakers/Drills

When work is unpredictable and you are pressed for time, you need to trust your gear. The Cobra™ is a teammate that you can grab and go. Anywhere. Cobra Petrol Breakers are ready to handle almost any task, in any location. Here is what we mean by “multi-purpose”.

tie tamping illustration
Tie Tamping

When trains follow their path, the ballast gets pushed out from underneath the sleepers. Tamping is the process of securing the ballast under the railway sleepers.

concreate breaking illustration
Concrete Breaking

The harder the material, the more weight and impact force is needed. Non-reinforced concrete is medium-hard and reinforced concrete is considered hard. Re-inforced concrete takes higher impact force (weight) and fewer blows per minute.

asphalt cutting illustration
Asphalt Cutting

Asphalt is flexible and considered a medium hard material. That means you need less impact force and more speed compared to breaking concrete. Good sound and vibration protection help keep your renovation work profitable.

digging illustration
Digging

When you dig with your Cobra™ you need to take soil type and compaction level into account. Tools include digging chisel for compact soils, digging spade for softer ground and clay spade for soils with high plasticity.

post driving illustration
Post Driving

Driving posts, spikes and rods often require much lifting and moving between work positions. The same often goes for driving rods and spikes along roads or railways. Working without hoses, compressors make work much easier.

compacting illustration
Compacting

Soil is Mother Nature’s upper crust. You tame it and make it stable by compacting. Different soils need different types of treatment – and tools.

Drilling illustration
Drilling

You need speed, lower impact force, turning and flushing when drilling holes. High speed and lower impact prevents the rock from breaking. Flushing removes drill chips from the hole while you are working.

Cobra Petrol Breaker Range

Cobra_TTe Petrol Breaker

Cobra TTe Breaker (Long)

Tie Tamper, Long Version

The Cobra™ TTe is optimized for railway applications and especially designed for tie tamping. It works at the relatively high frequency of 1,620 blows/min. Its impact energy is high enough to push the ballast back under the ties and low enough to prevent pulverization of ballast. The petrol-driven breaker is ideal for tie tamping in more ways. You don’t have to worry about compressors, hoses or cables, which makes it easy and safe to move around in rail yards and other high-risk environments with constant heavy traffic.

Easy Starters
TTe breakers have decompression valves and electric ignition. It makes them easy to start in all weather conditions.

Easy Transportation
Weighing in at just 24 kg the Cobra™ is easy to carry around and to fit in a car trunk.

Railway Specialist
The Cobra™ TTe delivers just the right amount of power for tie tamping.

We Take Care
The HAPS system (Hand Arm Protection System) makes the Cobra™ unique. It lets you do heavy-duty work more than two times longer compared to other petrol driven breaker models.

Two Sizes
When working in hazardous areas, like a switchyard, two different sizes to choose from will come in handy.

Air Filter
Your machine has a natural oil consumption . We have made it easy for you to check and make sure oil levels are optimal.

Technical Details 

Weight53 lb
Length36,5 inch
Depth13 inch
Width across handles13 inch
Impact energy40 joules
Blow frequency1 620 bpm
Drill depth0 m

Engine

Engine type1 cylinder, two-stroke
Cylinder Displacement90 cc
Power2 HP
Cooling systemFan cooled
Starter systemRecoil starter
Fuel typeAlkylat or 90–100 octane unleaded petrol
Fuel capacity0,26 gal
Fuel mixture2 %
Fuel consumption0 gph – 0,18 gph
Alkylateyes

Vibration & Sound

Vibration level 3 axes (ISO 28927-10)3.8 m/s²
Sound power level guaranteed (2000/14/EC)109 dB(A)
Sound pressure level (ISO 1120396 Lp. dB(A)

Available Shank Sizes

Shank size: Hex28×152 mm – 1 1⁄8 x 6 inch ;
28×160 mm – 1 1⁄8 x 6 1⁄4 inch ;
32×152 mm – 1 1⁄4 x 6 inch ;
32×160 mm – 1 1⁄4 x 6 1⁄4 inch
Cobra_TTe-final Petrol Breaker

Cobra TTe Breaker (Short)

Tie Tamper, Short Version

The Cobra™ TTe is optimized for railway applications and especially designed for tie tamping. It works at the relatively high frequency of 1,620 blows/min. Its impact energy is high enough to push the ballast back under the ties and low enough to prevent pulverization of ballast. The petrol-driven breaker is ideal for tie tamping in more ways. You don’t have to worry about compressors, hoses or cables, which makes it easy and safe to move around in rail yards and other high-risk environments with constant heavy traffic.

Easy Starters
The breakers have decompression valves and electric ignition. It makes them easy to start in all weather conditions.

Easy Transportation
Weighing in at just 24 kg the Cobra™ is easy to carry around and to fit in a car trunk.

Railway Specialist
The Cobra™ TTe delivers just the right amount of power for tie tamping.

We Take Care
The HAPS system (Hand Arm Protection System) makes the Cobra™ unique. It lets you do heavy-duty work more than two times longer compared to other petrol driven breaker models.

Two Sizes
When working in hazardous areas, like a switchyard, two different sizes to choose from will come in handy.

Easy Oil Check
Your machine has a natural oil consumption . We have made it easy for you to check and make sure oil levels are optimal.

Technical Details

Weight51 lb
Length36,3 inch
Depth13 inch
Width across handles13 inch
Impact energy40 joules
Blow frequency1 620 bpm
Drill depth0 m

Engine

Engine type1 cylinder, two-stroke
Cylinder Displacement90 cc
Power2 HP
Cooling systemFan cooled
Starter systemRecoil starter
Fuel typeAlkylat or 90–100 octane unleaded petrol
Fuel capacity0,26 gal
Fuel mixture2 %
Fuel consumption0 gph – 0,18 gph
Alkylateyes

Vibration & Sound 

Vibration level 3 axes (ISO 28927-10)3.8 m/s²
Sound power level guaranteed (2000/14/EC)109 dB(A)
Sound pressure level (ISO 1120396 Lp. dB(A)

Available Shank Sizes 

Shank size: Hex25×108 mm – 1 x 4 1⁄4 inch
PROi-long Petrol Breakers

Cobra PROi Breaker(Long)

Fuel-Injected Cobra Petrol Breakers, Long Version

The First Electronic Fuel Injection System On A Petrol Breaker

Less fuel, more power and easier starts regardless of climate and altitude

Up to 10% less fuel
Thanks to optimal combustion, you can achieve huge fuel savings.

Up to 10% more power
Cobra PROi gives more power at all working speeds

Easy starters
Regardless of climate or altitude

Taking care for the operator
Hand-arm vibration level 3 axes is below 4 m/s2

Low weight
Weighing in at just 24 kg the cobras are easy to carry around and to fit in a car trunk.

Air filter
The high capacity air filter gives a longer lifetime. The filter is easy to access for fast servicing.

Technical Details

Weight53 lb
Length36,5 inch
Depth13 inch
Width across handles13 inch
Impact energy60 joules
Blow frequency1 440 bpm
Drill depth0 m

Engine

Engine type1 cylinder, two-stroke
Cylinder Displacement90 cc
Power2,7 HP
Cooling systemFan cooled
Starter systemRecoil starter
Fuel typeAlkylat or 90–100 octane unleaded petrol
Fuel capacity0,26 gal
Fuel mixture2 %
Fuel consumption0 gph – 0,24 gph
Alkylateyes

Vibration & Sound

Vibration level 3 axes (ISO 28927-10)3.8 m/s²
Sound power level guaranteed (2000/14/EC)109 dB(A)
Sound pressure level (ISO 11203)96 Lp. dB(A)

Available Shank Sizes

Shank size: Hex28×152 mm – 1 1⁄8 x 6 inch ;
28×160 mm – 1 1⁄8 x 6 1⁄4 inch ;
32×152 mm – 1 1⁄4 x 6 inch ;
32×160 mm – 1 1⁄4 x 6 1⁄4 inch
PROi-short Petrol Breakers

Cobra PROi Breaker(Short)

Fuel-Injected Cobra Petrol Breakers, Short Version

Less fuel, more power and easier starts regardless of climate and altitude

Up to 10% less fuel
Thanks to optimal combustion, you can achieve huge fuel savings.

Up to 10% more power
Cobra PROi gives more power at all working speeds

Easy starters
Regardless of climate or altitude

Taking care for the operator
Hand-arm vibration level 3 axes is below 4 m/s2

Low weight
Weighing in at just 24 kg the cobras are easy to carry around and to fit in a car trunk.

Air filter
The high capacity air filter gives a longer lifetime. The filter is easy to access for fast servicing.

Technical Details 

Weight51 lb
Length36,3 inch
Depth13 inch
Width across handles13 inch
Impact energy60 joules
Blow frequency1440 bpm
Drill depth 0 m

Engine

Engine type1 cylinder, two-stroke
Cylinder Displacement90 cc
Power2,7 HP
Cooling systemFan cooled
Starter systemRecoil starter
Fuel typeAlkylat or 90–100 octane unleaded petrol
Fuel capacity0,26 gal
Fuel mixture2 %
Fuel consumption0 gph – 0,24 gph
Alkylateyes

Vibration & Sound

Vibration level 3 axes (ISO 28927-10)3.8 m/s²
Sound power level guaranteed (2000/14/EC)109 dB(A)
Sound pressure level (ISO 11203)96 Lp. dB(A)

Available Shank Sizes

Shank size: Hex25×108 mm – 1 x 4 1⁄4 inch